Script Each Column Separately
Printed From: BullCharts Forum
Category: BullCharts
Forum Name: BullScan
Forum Discription: For discusssions on BullScan
URL: http://www.bullcharts.com.au/forum/forum_posts.asp?TID=327
Printed Date: 10 Apr 2025 at 3:29am
Software Version: Web Wiz Forums 9.69 - http://www.webwizforums.com
Topic: Script Each Column Separately
Posted By: zzkazu
Subject: Script Each Column Separately
Date Posted: 05 Feb 2006 at 9:38am
|
I'm coverting one of my bullscans to a "Script Each Column" scan.
In the process I'm finding that I cant reference the columns as 'colA'
in the filter etc as the help file outlines. The variable isn't recognised.. I'm I missing something here? I worked it out I needed to reference with "colA"... zzkazu |
Replies:
Posted By: Brendon
Date Posted: 06 Feb 2006 at 4:53pm
|
Shall check. May need to update manual. ------------- 
|
Posted By: zzkazu
Date Posted: 06 Feb 2006 at 7:45pm
|
Brendon, bottom of my post outlined I was using the wrong syntax. |
Posted By: zzkazu
Date Posted: 25 Dec 2006 at 9:52am
|
I just realised by using the reference "colA" that the filter isn't filtering on the column results. Seems to be treating like a comment. Anybody else using column scripting? I thought the filter would be colA AND colB I was using "colA" AND "colB" but with or without filter you get the same results.. |
Posted By: xerques
Date Posted: 28 Dec 2006 at 7:56pm
|
Sometimes, Bullcharts flags "unrecognised variable colA", etc. when
run. It usually goes through on second attempt. Some sort of
intermittent bug. I do not use double-quotes when specifying colA or colB in the filter tab and I don't think you should use them. I suspect that you have errors in your columns. Can you explain what you mean by "with or without filter you get the same results."?? Do you get nothing at all in the results list or everything gets through? |
Posted By: zzkazu
Date Posted: 29 Dec 2006 at 10:25am
|
Thanks for the reply xerques. What I mean is the same results appear with or without filter content. But again I was using ".." which most probably meant the filter wasn't being used, so the outcome is not surprising. I will try to force the bullscan to accept the colA etc references to see what happens; if it works then truely strange. |
Posted By: zzkazu
Date Posted: 29 Dec 2006 at 10:30am
|
Looks like it works as you said... Error when creating and "applying and running" I just apply and re-open to run. thanks this one had be stratching my head. |